ADORAworksheet
Requesting Company Information
Company: _________________________ Contact Name/Title: ___________________
Address: __________________________ Phone/Fax ___________________________
__________________________ E-mail: _____________________________
Purchase Order # _______________________________
Date _____________________________ Needed by: __________________________
Ambient Atmospheric Conditions
Temperature _____________, Pressure ______________
Humidity ________________, or, Dew Point Temperature______________________________
Wind: Speed _____________, Height of Measurement ___________
Surface Roughness Length _______________
Cloud Cover (in eighths)______, Cloud Category (Low, Middle, High)_________
Day of Year _______________, Time of Day _______________ City/State_______________
Latitude ______________, Longitude ___________, Elevation (above sea Level)_____________
Stability (Choose One of the Following):
____ Wind Directional Standard Deviation ____________, Averaging Time ________
____ Solar Heating
____ Specify Directly _______ (0.5-6), or _______ (A-F)
Toxic Release Scenario for RMP-OCA
Instantaneous or Continuous (Circle One) Duration __________________________
Compound _______________________________ Mass, or Mass Rate ________________
Storage Temperature ____________ Storage Pressure (optional) __________________
Reaction Equation Desired ______________________________________________________
Kinetic Parameters, if available:
Reaction order for H2O/O2 (default is stoich. coeff.) ___________________
Reaction Activation Energy ____________________ (kcal/mol)
Reaction Rate Coefficient _____________________ (cc/mol)r.o. sec-1
Open Burn Open Detonation Scenario
Compound _________ _________ _________ _________
Mass _________ _________ _________ _________
Burn or Detonation (Circle One) Burn Duration _______________
If Above Ground: Release Height ______________________
Velocities of Release: Vertical_____________, Horizontal_____________
If Below-Ground Specify: 1) Percent That Remains Below (if known)__________________
Or 2) Charge Depth ____Soil Type and Composition _____________
Perform Calculation with Ground-Attached Tail? Yes No
Freezing Temperatures (Optional) ___________________________________________
Available Output (check desired output):
X Input / Output Summary of Cloud
Downwind Evolution Plots (before transition to passive dispersion)
____Temperature vs. ___Time, or ___Distance
____Height vs. ___Time, or ___Distance
____Volume vs. ___Time, or ___Distance
____Density vs. ___Time, or ___Distance
____Amounts ( ___moles, ___mass, or ___concentration)
vs. ___Time or ___Distance
for Compounds: ____________ ____________ ____________
Passive Dispersion Concentrations
Concentration Averaging Time__________________
Envelope of Concentration Contours:
Compound ____________________, Toxic Endpoint________________
____X-Y. Specify Height of Interest______________________
____X-Z. Specify Cross-wind Distance of Interest______________________
Concentration Contours:
Compound ____________________, Toxic Endpoint________________
Time After Release _______________
____X-Y. Specify Height of Interest______________________
____X-Z. Specify Cross-wind Distance of Interest______________________
Dosage Contours:
Compound ___________________, Toxic Endpoint________________
____X-Y. Specify Height of Interest______________________
____X-Z. Specify Cross-wind Distance of Interest______________________
Deposition Species: Compound _________________________
Particle Density _________, Particle Diameter ___________, Endpoint ______________
____X-Y. Deposition Concentration Contour
Other Plot Types:
Compound ____________________, Toxic Endpoint________________
____Conc. vs. Time at a Given Location: Downwind____ Cross-wind____ Height_____
____Max Concentration vs. Distance at a Given Height:___________
____X-Y Toxic Corridor: Height __________, Confidence Level (50-95%)___________
Other Information (if any) _______________________________________________________
Please fax or mail this form.
Notes: 1. Specify units next to each value
2. For contours, supply values of interest (up to three) .
3. Electronic data file can be provided in addition to hard copies of plots.
|
|